April 10, 2015

Cheap and durable (price matters !)



Starting note: This is a long post and I am going to cover a lot of ground. I have tried to cover a vast topic in a few pages, which is usually the subject of entire books. As a result, I have tried to simplify and generalize in several cases to make a point.

In the previous post, I tried to make the point that it is not enough to say that a company has a moat and then rush to your broker to put in an order. One needs to answer a couple of questions
 -          Does the company really have a sustainable competitive advantage or a durable moat? A high return on capital is a necessary but not a sufficient condition to demonstrate the presence of a moat
-          It is also important to judge the depth and durability of the moat. Deeper the moat and longer it survives, more valuable is the company

Do not focus too much on the math
I received a few emails asking me about the calculations on how I arrived at the PE ratios. As I said in my previous post, the math is not important for the point I am making - longer a company earns above its cost of capital, higher is its intrinsic value.

I would suggest that you use the standard DCF model and apply whatever assumptions you like for growth, ROE, free cash flow etc and just play around with the duration of the moat or the period for which the company can earn above the cost of capital. It should be quite obvious that longer the duration, higher is the value of the company.

For the really curious, I have uploaded my calculations here. Prepare to be underwhelmed!

Market implied duration
The other point i would like to make is by turning around the equation – If the company has a high PE ratio, the market is telling you that it expects the company to earn above its cost of capital for a long time.

For illustration, let’s take the example of Page industries (past numbers from money control, future numbers are my guess).
Future expected ROE = 50% (roughly 53% in 2014)
Future growth rate = 30% (40% growth in 2010-2014)
Terminal PE = 15
Current price = 14000 (approximately)

If I put in these numbers into DCF formulae, I get a Moat period of around 10 years.

So the market expects the company to grow its profit by 30% per annum for the next 10 years and maintain its current return on capital. This means that the company will earn a profit of  2000 crs by 2025.

So do I think that page industries will maintain its moat for 10 years or longer and grow at 30%?

I don’t know !

However if I did own the stock or planned to buy it, my next step would be to analyze the competitive strength of the company and see if the moat would survive 10 years and beyond, because if it didn’t I would be in trouble as a long term investor.

Precision not possible
In the previous example I used a fancy formulae and a long list of assumptions to suggest that the market considers page industries to have a competitive advantage period or moat (CAP for short) of 10 years.

Once you put a number to some of these fuzzy concepts, it appears that you have solved the problem and are ready to execute.

Nothing could be farther from the truth.

Anytime someone tries to give you a precise number on intrinsic value of a company, look for the assumptions behind it. As you may have read, the best tool for fiction is the spreadsheet.

The above calculation should be the starting and not the end point of your thinking. I typically do the above kind of analysis to look at what the market is assuming and put it into three broad buckets

2-5 years : Market assumes a short duration moat
5-8 years : Market assumes a medium duration moat
8+ years : Market assumes a long duration moat (bullet proof franchise)

Let’s look at some way to analyze the moat and bucket it in some cases

Measuring the moat
A substantial part of my post has been picked up from this note by Michael Mauboussin. The first version of this note was published in around 2002 and the revised one in 2013 (download from here)

If you are truly interested in learning how to discover and measure moats, I cannot stress this note enough (some important parts in the note have been highlighted by me) . Read it and then re-read it a couple of times. The only point missing from this note is the application of the concepts – Michael mauboussion does not provide any detailed examples of applying the concepts to a real life example.

Model 1: Porter’s five forces analysis
I am not going to write a detailed explanation of this model – you can find this here. I have used this model to analyze IT companies in the past – see here. A few more posts on the same topic can be found here and here.

Let me try to explain my approach using an example from the past. Lakshmi machine works was an old position for me (I no longer hold it). As part of the analysis, I did the five forces review of the company/ industry which can be downloaded from here

A few key points about the analysis
-          The entry barriers were quite high in the textile machinery industry. Once a company like LMW has established itself and achieved a market share in excess of 50%, it was difficult for a new competitor to achieve scale. A textile mill with only LMW machines finds it easy to maintain and repair these machines (due to accumulated learning) or get this done from LMW which has a large service network. LMW, due to a large install base, is able to provide a high level of service (network effect) at a low cost (due to scale of operations). So we have a case of positive loop here–  Largest company is able to provide a cost effective solution and high levels of service and still earn a good return on capital

-          The other factors such as Supplier power, substitute products etc are not critical to evaluate the industry

-          There is a certain level of buyer concentration, but the machinery segment has far higher concentration and hence the balance of power is still with LMW

-          Finally rivalry is muted as LMW has a level of customer lockin . A satisfied customer will prefer to continue with the same supplier (Who is also cost effective) as it allows it to achieve a higher uptime in operations and lower cost of maintenance (maintenance team needs to maintain only one brand of machines)

The above is also visible in the form of a very high return on capital for LMW – The company  had a negative working capital for 10+ years and earned 100% + on invested capital at the time of this analysis

As I analyzed the company in 2008, I felt strongly that the company had a medium (5-8) or a long duration moat. It was not important to arrive at a precise number then, as the company was selling at close to cash on books and the business was available for free. Surely a business with a medium term moat was worth more than 0 !

Model 2: Sources of added value
The second mental model i frequently use is the sources of added value – production advantages, customer advantages and government (pages 34-41 of the note)

I have uploaded the analysis for CERA sanitary ware (current holding), I had done in 2011. Look at the rows 14-19 for the details.

A few points to note
-          The company enjoys scale advantages from demand, distribution, advertising etc. As the company gets bigger, these cost advantages would increase ensuring that the company will be able to price its product at the same level as its competitors and still earn a good profit

-          The company also enjoys customer side advantages from brand/ trademarks and availability

As you run through this checklist/ template, you will notice that a company could have either production or customer advantages due to various factors. However a company which has both has a powerful combination. If these two sources of value are working together and growing, then we may be able to say that the company has a medium or long duration moat

In case you are curious, I thought that CERA had a small to medium moat in 2011. This has expanded since then and the company most likely has a long duration moat now.

Model 3: High pricing power
Another key indicator of competitive advantage is the presence of pricing power. The following comment from warren buffett encapsulates it

“The single most important decision in evaluating a business is pricing power. If you’ve got the power to raise prices without losing business to a competitor, you’ve got a very good business. And if you have to have a prayer session before raising the price 10 percent, then you’ve got a terrible business.”

How do you evaluate this ? Look for clues in the annual report or management responses to questions in conference calls. Does the management talk of margins being impacted severely due to cost pressures ?

For example – Companies like Page industries or asian paints are generally able to pass through cost increases to customer without losing volumes. When the input costs drop they can either increase their margins or use this excess profit in advertising and promotions and thus strengthen their competitive position. Can steel or cement companies do the same ?

Other miscellaneous models
  1. Is the competitive advantage structural (based on the business) or the management. An advantage based on the management is a weak moat and can change overnight if the same team is not in charge
  2. Industry structure : A duopoly or an industry with limited competition is more likely to have companies with competitive advantage. Look at batteries, two wheelers or sanitaryware for example. One is likely to find companies with medium or long duration moats in such industry structures.
  3. Govt regulation : This can be due to special ‘connections’. If you find a moat due to this factor, be very careful as this can disappear overnight
A brief synthesis
I have laid out various models of evaluating the competitive advantage of a company. Once you go through this exercise, you can arrive at a few broad conclusions
-          No moat: A majority of the companies do not have a moat. As you go through the above models and are hard pressed to find anything positive, it is an indicator that the company has no competitive advantage. Even if the company has been earning a high  return on capital in the recent past, it could be a cyclical or temporary phenomenon. Look at several commodity companies which did well in the 2006-2008 time frame, only to go down after that.
-          Weak moats : If the moat depends on single a production side advantage such as access to key raw material or government regulation, it’s a weak moat (think mining or telecom companies). The company can lose the advantage at the stroke of a pen, law or whims and fancy of our politicians. In addition the pricing power of such companies is very low. I would categorize such a moat as a weak one and not give it a duration of more than 2-3 years.
-          Strong, but not quite : If the moat depends on customer advantages such as brands or distribution network, the moat is much stronger. A company with a new brand which is either no.1 or no.2 has a much stronger moat. I tend to give the moat a medium duration (5-8 years). The reason for being cautious at this stage is that the company clearly has a competitive advantage, but the strength has not been tested over multiple business cycle. In addition, in some case the business environment is subject to change and one cannot be too confident of the durability of the moat. The example of LMW or CERA in the past is a good one for this bucket
-          The bullet proof franchise :These are companies with multiple customer and production (scale related) advantages. These companies are able to command high margins, can raise prices and at the same time have a very competitive cost structures due to economies of scale. These companies have demonstrated high returns of capital over 10+ years and continue to do so. In such cases, one can assume that duration of the moat is 10+ years. These cases are actually quite easy to identify – asian paints, nestle, Unilevers, pidilite, HDFC twins and so on.

Moats are not static
A key point to keep in mind is that moats are not static, but changing constantly. In some cases the moat can disappear overnight if it depends on the government regulation (such as mine licenses), but usually the change is slow and imperceptible and hence easy to miss.

If you can identify the key drivers of a company’s moat, then you can track those driver to evaluate if the management is strengthening or weakening the moat. For example, the moat of an FMCG company is driven by its brands and distribution network. As a result, it is important to track if the management is investing in the brand and deepening/ widening the distribution network.

In the case of LMW, I think the moat has slowly shrunk due to the entry of Reiter ltd. Reiter was the technology partner and equity holder in LMW. The two companies have since parted ways and Reiter is now competing aggressively in the same space.

LMW has repeatedly indicated that they are now facing a higher level of competition in India and consequently there has been a slow drop in operating profit margins. In addition one can see an increase in the working capital usage too. I cannot precisely state that the moat duration has shrunk from 10.7 years to 6.3 years, but there is increasing evidence that the moat is under pressure. As a result, I exited the stock a few years back.

Putting it all together
Let’s assume that you have done a lot of work and figured out that company has moderate moat possibly 5-8 years. At this point, you can plug in the required variables into a DCF model and analyze the market implied duration of the moat (the way we did for Page industries)

If the market thinks that the company has no moat or a minimal moat, than you have a probable buy. If however the market implied moat is 10+ years, then the decision would be to avoid buying the stock, not matter how good the company

The above sounds simple in theory, but is far more difficult in practice – I never promised that I will be giving you a neat, fool proof formulae of making a lot of money by doing minimal work :)

The moat of a long term investor
If the all of the above sounds too fuzzy and cannot be laid out in a neat formulae, you should actually feel very happy about it. Think about it for a moment – if something is fuzzy and requires a combination of a wide experience, insight and some thinking, it is unlikely to be done successfully by a computer or fresh out of college analysts. 

Can a research analyst go and present this fuzzy thinking to his head of research, who wants a precise target price for the next month ?

So any investor who has a long term horizon and is ready to invest the time and effort to do this type of analysis will find very little competition. It is a general rule of business that lower competition leads to higher returns – the same is true for investing too.

If you buys stocks, the way most people buy shoes, TV or fridges – after due research on features, durability (how long the consumer durable will last) and then compare with price, the result will be much better than average

----------------
Stocks discussed in this post are for educational purpose only and not recommendations to buy or sell. Please contact a certified investment adviser for your investment decisions. Please read disclaimer towards the end of blog.

11 comments:

Anonymous said...

dear rohit
too much of a hard work..thank god some one like you do it for everyones benefit. and, anything greatly diffrent in wide moat vs deep moat investing

Shailesh Naik said...

The risk is buying quality business at high price , HUL gave almost zero returns from 2003- 2012 inspite of all possible durable moat characteristics and tisco a commodity company increased by almost 15x in the same period .

Quality business is like buying branded products , If you are not sure how to judge business , update yourself on macro & micro environment go for branded products otherwise money will be made more in unbranded products ( One can check with asian paints distributors where he make his money from paints or selling Non branded auxiliaries)

Stable_Boy said...

Your last point about the moat for long term investor makes me feel better :-)

Lucky said...

Undoubtedly one of your best posts ever. Thanks a lot for the hard work.

Rohit Chauhan said...

thanks anon

Rohit Chauhan said...

hi shailesh
i never said price does not matter. one can always overpay for any good business

tisco did well due to the bull market for steel. there are other commodity companies where one lost money

rgds
rohit

Rohit Chauhan said...

stable_boy - :) we will continue to have our niche

Rohit Chauhan said...

Hi lucky
thanks for the comment. it took me over a month to think and put this together ..glad it shows up

Balaji said...

Hi Rohit,

I quite do not agree with the point that one can always overpay for a good business.
Ultimately, one has to make money whether he/she buys a good quality business or not so quality business. Good companies are not necessarily good investments. It depends upon the price you pay.
Though wide moat companies are good long term investments, one needs to be careful about the buying price especially in today’s environment.
Since all markets or asset classes operate in cycles, success of investor lies in identifying the stages of cycles and making money.

Regards
Balaji

Anonymous said...

To have the moat the company needs to earn more than its cost of capital. How do you come up with the cost of capital for a company? Do you use the same cost of capital for every company or change it?

Anonymous said...

Great post. However, you mention that you are still bullish on Cera which was at PE 60 on the day of this post. I read elsewhere Sanjay Bakshi saying that he takes max PE after 10 years as 20. Which means Cera's PE should fall from 60 to 20. So even if Cera grows its earnings by 10 times in 10 years - compounding at 25%+ - still the fall in PE will cause returns to be moderate at best. Why should Cera then be not a sell at such high valuations?